BRIO PRIMESENSE™ LINE
Brio PrimeSense™
Technical FAQs
Commercial infrared touchless faucet with solid brass
construction, PVD finish, electronic valve control,
adjustable sensing, and 1.2 GPM water-saving performance.
✥ Sensor Calibration Procedure? +
Complete sensor commissioning after the basin,
backsplash, countertop and surrounding accessories
are installed. Confirm reliable hand detection
throughout the intended sensing field and adjust
the sensor range where required.
◇ Hydraulic Checks During Installation? +
Flush the supply line before final connection,
confirm service stops are fully open, inspect
inlet filtration for debris, and verify secure
supply fittings before commissioning.
◯ Flow Rate Verification? +
Verify approximately 1.2 GPM under normal dynamic
operating conditions. If output is restricted,
inspect the aerator, inlet filters, service stops,
and available water pressure.
↻ Continuous Water Flow Diagnostics? +
Clean the infrared sensor window, remove reflective
objects from the sensing field, verify stable
electrical power, and inspect the electronic valve
for debris or incomplete seating.
⌁ Sensor Detection Range? +
The adjustable sensing field allows commissioning
for different basin and countertop geometries while
reducing unintended activation from nearby
reflective surfaces.
⌂ Operating Water Pressure? +
Maintain stable dynamic inlet pressure within the
specified operating range. Excessive pressure should
be regulated, while low dynamic pressure may reduce
available flow.
⚡ Power Supply Options? +
Verify the specified AC or battery power
configuration before commissioning the infrared
sensor and electronic valve assembly.
⌕ Routine Maintenance Requirements? +
Periodically clean the sensor window and aerator,
inspect inlet filtration, remove mineral buildup,
and verify reliable electronic valve shutoff during
scheduled maintenance.
Gold
