Installation Instructions for Trialo Solid Brass Color Changing Water Powered Led Shower

1. Use your hands counter clockwise to unscrew the old showerhead and removed it.
2. Take out the showerhead, make sure the shower filter is placed in the connector.
3. Ensure the showerhead full horizontal alignment wall mounted shower arm thread.
4. Use your hands clockwise to tighten showerhead.

1. Set the decorative cover on the body jet.

2. Roll the raw material belt in the thread screws.

3. Use a wrench to tighten 6 body jets on the water outlet holes in a clockwise direction.

Sensor Mixer

Operation

· Fly-shuttle switch
· Setting
· Power on/off
· LCD Display

Notice

1. The control panel is sensitive, when you install it, please avoid to let it face directly to the water from hand shower and the head shower because water will get it misoperation or lock the control panel.

2. The touch button is the best sensitive area.

3. The touch panel has water splash protection technology. When the system detects misoperation, no response, and need about 1 second to recover.

Function

1. Water TEMP adjust

2. Hand shower

3. Head Shower

4. Water flow adjust

Operation

1. Power on/off
Power on

After electrify, you can touch to make the system ON. When you hear buzzer sound, the fly-shuttle switch and the LCD panel would be lighting. Water TEMP and water flow will be the same as that you set last time. The cursor will be on the icon you using last time. The default working time is 60 minutes.
Power Off

When the system on, touch again to make the system OFF or the default working time is up, when you hear buzzer sound that means have close all the functions.

NOTE: (the background color of the fly-shuttle switch)

LED show blue color when TEMP below 33° C

LED show orange color when water TEMP between 34° C- 41° C

LED show red color when water TEMP over 41° C

2. Hand shower and head shower switch

When system on, rotating the fly-shuttle button left or right. the cursor would move to icon, pressing the fly-shuttle button to open hand shower or head shower (hand shower and head shower are inter-locked, you can turn on only one time), the corresponding operation icon would brighten up on the LCD panel after turning on. The cursor could move to icon, pressing again the fly-shuttle button to close hand shower or head shower, the corresponding function icon would be dark.

Battery Installation

1. Loose the screws on the battery cover and take it off.

2. Putting 4 pcs rechargeable batteries into the battery slot of the host box.

Attention: When putting the battery into the host box, you need to identify the anode and the cathode.

1. Insert the battery cover into the host box, and Lock it with the screws.

Caution:

• Using rechargeable NI-MH battery [the 5#(AA) and the capacity is more than l000Mah).

• After electrify, forbid using the normal 5#(AA) battery. Otherwise, would cause the battery explosion.

• When the power cut, you can use the high quality normal 5#(AA) dry battery as the emergency measure. But you must unplug the adapter.

• When you install the host box, please put the battery into it. If the product hasn't connected with the power in a long time. Please take out the battery from the host box. This way can avoid affecting the battery working life.

• If you want the battery with a longer working life, you can charge the battery every some months.

Installation of the Control Panel

There are two kinds of installation ways shower controller according to the installation site, one way is to recess mount into the wall. Another way is to build into the shower panel.