Home > INSTALLATION INSTRUCTION FOR LEMANS LUXURY ANTIQUE BRONZE COPPER CARVING DECK MOUNT

HOW TO INSTALL LEMANS LUXURY ANTIQUE BRONZE COPPER CARVING DECK MOUNT | BS-AB12813


Single Handle Deck Mounted Sink Faucet

Fort-de-France is a solid bathroom sink faucet, in antique bronze finish. You can choose it either because it fits well together with other antique style elements in your bathroom, or because you need a fixture standing out in a modern environment. It has a single handle, built-in hot and cold water mixer and it requires one hole for installation. Only the best quality materials have been used - the valve core material is ceramic, for a long lasting life time. It comes complete with accessories and installation instructions.

Features:faucet installationVisit Product Page
  • Type: Sink Faucet
  • Faucet Mount: Single Hole
  • Brand Name: Fontana
  • Type: Ceramic Plate Spool
  • Valve Core Material: Ceramic
  • Style: Contemporary
  • Hot & Cold Water: Yes
  • Number of Handle: Single Handle
  • Installation Type: Deck Mount
  • Surface Treatment: Antique Bronze
  • Style: Single Holder Single Hole
  • Model Number: B12813
  • Flow Rate: 1.3 GPM
LEMANS LUXURY ANTIQUE BRONZE COPPER CARVING DECK MOUNT

Important Note:

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all products must be installed by a professional and certified plumber otherwise warranty may be voided.



  • Faucet Installations Instructions


    SizeDeck Hole Size

    faucet

    Specs:
    Type : Hot & cold
    Material: Brass
    Test pressure: 0.5 ~ 0.6mpa
    Valve type: Ceramic
    GPM: 1.4



    Step 1:Step 2:

    faucet


    Step 3:Step 4:





    1. Remove the mounting nut, metal washer, and rubber washer from the threaded pipe.
    2. Fit the O-ring into the groove of the faucet body. Screw waterlines into the corresponding screw-hole of the faucet body.
    3. Insert waterlines and threaded pipe into the hole of the sink.
    4. Install rubber washer, metal washer, and mounting nut back to the threaded pipe. Adjust the faucet body correctly and secure with mounting screws tightly.
    5. Connect waterlines to angle stops. Turn on the angle stops and check for leaks (DO NOT TURN FAUCET ON).
    6. Turn faucet on for 1 minute to flush any debris.

    Important: Turn on hot and cold water supplies and flush water lines into a container for one minute. This flushes away any debris that could cause damage to internal parts.





    Flexible Connecting Hose

    Care must be taken when connecting the flexible connection hose from the power supply box to the spout to ensure it does not bend sharply and kink or twist.
    See above for recommended ways to fit the flexible connecting hose.

    Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connection hose.


    BathSelect Installation Instructions