Home > Installation Instructions for Soma Oil Rubbed Bronze Finish Thermostatic Shower Set

How to Install Soma Oil Rubbed Bronze Finish Thermostatic Shower Set Rain Head Multifunction Handset & 6 Jets | BZ-5645RB


Enhance your modern bathroom with the Soma Oil Rubbed Bronze Thermostatic Shower Set, which comes complete with the Square ceiling mount shower head with sizes you can choose from: 8", 10", 12", 16", 20", 24" and 8” an adjustable slide bar for your hand shower, six square body jets and the thermostatic triple shower valve. Constructed from solid brass with a high-quality oil rubbed bronze finish, the thermostatic shower valve features stylish yet easy to use handles that control the flow and temperature of the water and a diverter that allows you to switch between the fixed head, hand shower or the body jets. Made from solid brass that looks sleek and modern but delivers a refreshing showering experience. The wall-mount arm has been made from brass. The square body jets enhance the overall showering experience and provide an invigorating massage effect, while the hand shower with adjustable slide bar allows for easier rinsing and cleaning.



Features:Visit Product Page
  • Brand Name: BathSelect
  • Model Number: BZ-5645RB
  • Shower Set: Showerhead, Body jets, Triple valve
  • Showerhead sizes available: 8", 10", 12", 16", 20", 24"
  • Shower arm size: 8" adjustable arm
  • Jets: 6 square body jets
  • Valve: 3 ceramic valve
  • Material: Brass
  • Flow rate: 2.5GPM
  • Function: Thermostatic Shower set
  • The flow rate is 2.5 GP
  • Showerhead Installation: Ceiling mount
  • Jets and shower arm installation: Wall-mount
  • showerSoma Oil Rubbed Bronze Finish Thermostatic Shower Set Rain Head Multifunction Handset & 6 Jets

    Important Note:
  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the products for any shipping damages. If you find damages, do not install.
  • Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.


  • Shower Head Installation Instructions

    Ceiling Mount Shower Installation Instructions

    Step 1:Step 2:
    shower
    installation
    Step 3:Step 4:
    Step 5:Step 6:

    Step 1: Take Out the Old Shower Head
    You can easily remove it by hand, but depending on how long the rain showerhead has been installed, you might need to use an adjustable wrench. Hence, if you find it difficult to remove, rotate the showerhead with an adjustable wrench in a counterclockwise direction to unscrew it.

    Step 2: Keep the Shower Arm Clean and In Good Shape
    After you have removed the head, check the shower arm threads for any debris and old Teflon tape. If you find any, remove it and clean them off thoroughly. It’s best to use a microfiber cloth when cleaning the thread because it removes Teflon tape perfectly and works great to pick up tiny grits.
    Once you’re done cleaning, check if it is corroded or leaking. For damaged threads, it will be best you replace it entirely so you can have a comfortable shower experience any time.

    Step 3: Time to Add New Teflon Tape
    Since you have removed the old Teflon tape, you have to replace it with new ones. The reason is that this tape helps to protect the shower from leaking after installing the showerhead. Now apply the new Teflon tape about 3-5 turns on the thread and tear the end part. Use your hands to smooth it out to keep it leveled to the thread. Keep in mind that when applying the tape, you should go in a clockwise motion so that it doesn’t come off when you attach the head in the same direction.

    Step 4: Connect the Showerhead
    As said earlier in the tools needed, we’re using the rubber sealing washer that comes with the showerhead. This tool helps to make the showerhead stay watertight and secured on to the thread. Ensure you place it properly before installing it.
    After that, reconnect the shower head and tighten it down with your hands. You can employ a chair or ladder to make things easier for you.

    Step 5: Tighten the Showerhead
    On To the Thread You will need to get the adjustable wrench handy to tighten down the shower very well. But make sure you wrap the threads with a terry cloth, so it doesn’t damage the finish when tightening the showerhead.
    Once you have done that, now use the adjustable wrench to tighten down the showerhead. However, don’t over-tight or force it so that it’s easier to remove in the future.

    Hand Held Shower Installation Instructions


    Size :



    Step 1: hand shower installation

    Step 2:





    Step 3: Step 4:
    BathSelect Installation Instructions
    Skip to content