How to Install Havana Double Handled Brushed Nickel Wall Mount Bathtub Faucet | BS756DHB
|
|
Havana Double Handled Wall Mount Bathtub Faucet - 3 pc
Havana is a wall mount bathroom faucet, with a stylish curved shape that accentuates the beauty of its waterfall feature. Perfectly fit for modern bathrooms, the faucet handles and the spout are in brushed nickel finish. The waterfall spout width is 3.5 inch, which might make this faucet model suitable for some larger bathroom sinks as well. It is wall mount, with three holes and a hot and cold water mixer is built-in for your comfort. Only the best materials have been used: the body and spout are made of solid brass and the valve core material is ceramic, for improved functionality and long lasting life time. It comes complete with mounting accessories and installation instructions.
|
|
|
|
|
|
|
|
Features:
|
|
|
- Type : Bathtub Faucet
- Valve Core Material : Ceramic
- Style : Classic Contemporary
- Hot & Cold Water : Yes
- Number of Handles : Dual Handles
- Installation Type : Wall Mount
- Surface Treatment : Brushed Nickel
- Installation Holes : Three Holes
- Waterfall spout width 3.5-inch (8.9 cm)
- Faucet Body Material : Brass
- Faucet Spout Material :
Brass
|
faucet
|
|
Installation Instructions for 3 pc Bath Tub Faucet Set
|
Parts List:
|
|
|
|
|
|
|
Step 1: Faucet Size
|
bath faucet
|
Step 2:
|
|
|
|
|
|
|
|
Step 3: Handle Size
|
|
Step 4: Handle Installation
|
|
|
|
|
|
|
|
Step 5:
|
|
Step 6:
|
|
|
|
|
|
|
|
Step 7:
|
|
|
|
|
|
|
|
|
Installation Instruction
Before installing your new mixer, flush through the pipework to ensure the removal of debris, turn off the water supply.
The valve must be set into the wall.
Mark a horizontal line on the wall at the required height, mark the position of the valve and the spout, drill the holes.
Mark the position of the valve and drill 2 holes to take suitable wall plugs and screws.
Connect the water supply to the inlet pipes. The hot water should be connected to the left-hand tap.
Screw the cover plate over the valve and up to the wall, push the ‘O’ ring onto the splines, push on the control handle in a horizontal position and fix in place using the hexagonal key.
Screw on the spout up to the wall.
1. Fix the valve body into the wall with screws. Make sure the valve body is completely level.
2. Connect the hot and cold water inlets of the valve body to the main water supply.
3. Apply teflon tape to the threaded pipe and screw it into the valve outlet. Then, put rubber washer to the spout body and screw the spout body into the threaded pipe.
4. Fix the handle escutcheon onto the valve firmly against the finished wall. Install the handle to the valve, then tighten the set screw with Allen key and place the indication button on the handle.
|
|
|
|
|
|
|
Cleaning & Maintenance
To keep product clean and shiny follow the instruction below.
1. Flush with clean water and dry with soft cloth only.
2. Do not use any detergent, polisher, sane-cloth, or a scraper.
3. Do not use acid detergent.
|
|
|
Product Images
|
1:
|
bath faucet
|
2:
|
|
|
|
|
|
|
|
3:
|
|
4:
|
|
|
|
|
|
|
|
5:
|
|
6:
|
|
|
|
|
|
|
|
|
|
|
