Installation Instructions for Verde Chrome European Bath Faucet

verde chrome european bath faucet

Newest Chrome European Bath Faucets

Faucets are one of the most utilized yet overlooked fixtures in the bathroom. Aside from being a functional piece, our bathroom faucets also help to enhance the appeal of a bathroom by adding a touch of elegance and sophistication to it – this is especially true with waterfall faucets. These types of faucets come in a wide array of styles and designs, and will certainly make a lovely addition that will complement any bathroom, no matter what the design may be.

Verde Chrome Bathtub Faucet Details:

Type: Bath & Shower Faucets Valve Core Material: Ceramic Bath & Shower Faucet Type: Deck-Mount B & S Faucets Surface Finish: Chrome Style: Contemporary Number of Handles: Dual Handle Surface Treatment: Polished Valve Type: Ceramic Valve Bath & Shower Faucet Type: Deck-Mount Bath Faucets Type: Waterfall Bathtub Faucet Valve Material: Brass Spout Material: Stainless steel(sus304) Working Pressure:0.1-2.0mpa Certificate: CE, ROHS Fitting parts: A waterfall faucet with dual handles Cartridge: Lifetime >500, 000 times for both open and close Two 30cm(11.81")-long hose. 1 x Installation Instruction Spout Material: Stainless steel (sus304) Plating layer: Chrome polished (thickness: Ni>=15um Cr>=0.2um, multilayer Finish process) Working Pressure: 0.1-2.0mpa The flow rate is 1.8 GPM

BathSelect® Manufacturer Warranty Information

1. When the wall around the rough-in valve is finished, install your faucet trim.
2. If your faucet spout is not assembled, assemble by connecting the threaded outlet to the faucet body. If your spout is already assembled move on to the next step.
3. If your faucet features a decorative face plate, secure the face plate to the wall with silicone sealant before installing your handle and spout trim pieces. Make sure that the faceplate is properly aligned over the rough-in valve and perfectly straight. If your faucet does not feature a face plate move on to the next step.
4. If the decorative spout escutcheon is not attached, place the escutcheon on the body of the spout and install the spout over the spout shank. Screw the spout into place and press the escutcheon firmly against the finished wall.
5. Tighten any set screws in the spout with the Allen wrench.
6. Install the handle(s) and any necessary hardware and tighten the set screws with your Allen wrench. If rubber O-rings or sealing gaskets are included, Place between the handle body and wall to create a water tight seal.
7. When your faucet installation is complete, turn on the water supply. Check to make sure that all connections are tight (no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and allow the water to flow through the spout for approximately 60 seconds. Allow sealant to cure for 24 hours before use.