Home > Detail Installation Taranto Deck Mount Single Handle Faucet

Installation Instructions for Taranto Deck Mount Single Handle Faucet

Taranto Deck Mount Single Handle Faucet with Hot/Cold Water Mixer

Taranto is an elegant sink faucet with an attractive curved design and beautiful gold finish. It comes in two sizes, 15 or 24 cm height, so it can fit any kind of sink. It can be used either as a bathroom sink or a kitchen sink. It is deck mount, single hole, with one handle and built-in hot & cold water mixer. Only the best materials have been used – valve core in ceramic material, for a long lasting life time. It comes complete with accessories and installation instructions.

Taranto Deck Mount Single Handle Faucet Specifications

  • Valve Core Material : Ceramic
  • Surface Treatment : Painted
  • Installation Type : Deck Mount
  • Style : Single Holder Single Hole
  • Style : Contemporary
  • Number of Handle : Single Handle
  • Hot & Cold Water : Yes
  • Faucet Mount : Single Hole
  • Type : Ceramic Plate Spool
  • Finish : Gold
Taranto Deck Mounted Single Handle Faucet with Hot/Cold Water Mixer
BathSelect® Manufacturer Warranty Information













Juno Brushed Nickel Square Bathroom Vessel Sink Faucet 2. Attach the provided braided water lines to the faucet until hand tight.
Juno Brushed Nickel Square Bathroom Vessel Sink Faucet
3. Remove the brass lock nuts from the mounting posts, and attach the threaded mounting posts to the faucet body using a Philips screwdriver. Set the brass lock nuts aside for now.
4. Set the faucet into its prepared mounting hole.
Juno Brushed Nickel Square Bathroom Vessel Sink Faucet
5. From below, slide the rubber washer onto the mounting posts followed by the metal washer. Hold in place.
6. Secure the faucet by reattaching the brass lock nuts that were removed in step 3. Hand tightens and adjust the faucet until it is properly aligned. Once aligned, use the provided basin wrench to finish tightening the locknuts.
Juno Brushed Nickel Square Bathroom Vessel Sink Faucet
7. Apply plumber’s tape or thread sealant to the threading on each braided water line. Attach the water lines to your main water supply. Ensure that you are connecting the hot and cold lines accordingly.
8. Once installation is complete, turn the main water supply back on from underneath your sink. Check for any leaks underneath.
9. Check to ensure that both cold and hot water running properly. Allow the water to flow for approximately 60 seconds to remove any dust or sediment within the waterlines.
Juno Brushed Nickel Square Bathroom Vessel Sink Faucet

BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions