Installation Instructions for Romo Contemporary RGB Multi Color Water Powered Led Shower Head
|
22 Inch Stainless Steel RGB Multi Color LED Rain Shower Head
|
With this two functions waterfall and rain shower head you can turn on the fun in your shower just by turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built in dynamo that takes advantage of the water pressure to create the energy to light the bulbs.
|
|
Features:
- Waterfall and Rain Shower head can work separately or combined.
- This high tech rain shower head powers the LED lights using a built in hidden dynamo
- The lights will automatically turn on when water pressure is turned on
- The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water and light
- The shower head will automatically change colors according to the temperature of the water so you always know how the water will feel on your skin just by looking at it
- Never be scalded again by entering a shower that is just too hot
- Modern stylish design completely made to match or stand out from your other bathroom fixtures
- High quality this modern shower head is made out of stainless steel, so it's made to last!
|
|
Turn on the fun in your shower just by turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built in dynamo that takes advantage of the water pressure to create the energy to light the bulbs.
|
Technical Details of Romo 22" Contemporary RGB Multi Color Water Powered Led Shower Head
1. Open the top cover and drill according to the marked position.
- Mark by the position of the four holes.
- Take care to avoid wires and pipes to prevent damage.
- Be sure to confirm that the four holes are on the same horizontal line.
2. Two inlet fittings are connected to the pipe joint of the wall; then the nut, expansion screw, and inlet pipe are connected
|
|
|
