Installation Instructions for Rio Rouge Temperature Controlled Faucet
Rio Rouge temperature controlled Faucet
Thermostatic faucets need not be drab as proven by this cool Rio Rouge Temperature Controlled Faucet from Juno. This faucet boasts of a highly polished surface that gives it an excellently elegant finish, yet it also incorporates a colorful handle which gives it a much more more fabulous and modern appeal. The handle comes in a myriad of quirky and eye-catching colors - from the more toned down white, black, and chrome, to the more vibrant read, orange, yellow and green. What's more is that the high grade Finish treatment will ensure that this faucet will keep its stellar look for a very long time. In addition, this faucet is constructed from top notch brass material which promises a long service life. Perfect for the modern and contemporary bathroom, this thermostatic faucet from Juno is definitely one bathroom fixture that you wouldn't want to pass.
Rio Rouge Faucet
|
|
|
Brand Name
|
Juno
|
|
Style
|
Contemporary
|
|
Hot & Cold Water
|
Yes
|
|
Number of Handle
|
Single Handle
|
|
Surface Treatment
|
Highly Polished Surface
|
|
Style
|
Single Holder Single Hole
|
|
Type
|
Sink Faucets
|
|
Faucet Mount
|
Single Hole
|
|
Type
|
Ceramic Plate Spool
|
|
Valve Core Material
|
Ceramic
|
|
Feature
|
Thermostatic Faucets
|
|
Installation Type
|
Deck Mount
|
|
Model Number
|
BZ-5913
|
|
Type
|
Single hole sink faucet mixer taps
|
|
Function
|
Hot cold water mixer taps
|
|
Material
|
Solid brass construction
|
|
Surface finished
|
White color finished
|
|
Surface treatment
|
Highly polished surface, keeping new for 10 years
|
|
Color
|
White color body, red color handle
|
|
Number of Handle
|
Single Handle
|
|
Color of Handle
|
Red
|
|
Hose
|
Stainless steel 304 braided hose
|
|
Hose Length
|
50cm (1.96")
|
|
Flow Rate
|
2.5 GPM
|
|
|
Item Number
|
BZ-5913 (white color faucet body + red color handle)
|
|
Material
|
Faucet Body: Solid Brass Construction Handle: PPS Material
|
|
Handle Color
|
White/ Orange/ Green/ Black/ Red/ Yellow/ Chrome
|
|
Tips
|
PPS -- Polyphenylene
|
|
( Polyphenylene sulfide is an engineering plastic, commonly used today as a high-performance thermoplastic. PPS can be molded, extruded, or machined to high tolerances. With 40 percent glass fiber, PPS is an excellent cost-effective material. Its hardness, abrasion resistance, weld line integrity and other properties are better than most high-temperature thermoplastics. )
|
|
Surface Finished
|
Chrome/White/Black
|
|
Surface Treatment
|
Highly Polished Surface
|
|
Valve Core Material
|
Ceramic Disc 0.98" (25mm) Water Saving Cartridge
|
|
Installation
|
Surface Mount Installation
|
|
|
   
BathSelect® Manufacturer Warranty Information
|
|
       
 2. Attach the provided braided water lines to the faucet until hand tight.
3. Remove the brass lock nuts from the mounting posts, and attach the threaded mounting posts to the faucet body using a Philips screwdriver. Set the brass lock nuts aside for now.
4. Set the faucet into its prepared mounting hole.
5. From below, slide the rubber washer onto the mounting posts followed by the metal washer. Hold in place.
6. Secure the faucet by reattaching the brass lock nuts that were removed in step 3. Hand tightens and adjust the faucet until it is properly aligned. Once aligned, use the provided basin wrench to finish tightening the locknuts.
7. Apply plumber’s tape or thread sealant to the threading on each braided water line. Attach the water lines to your main water supply. Ensure that you are connecting the hot and cold lines accordingly.
8. Once installation is complete, turn the main water supply back on from underneath your sink. Check for any leaks underneath.
9. Check to ensure that both cold and hot water running properly. Allow the water to flow for approximately 60 seconds to remove any dust or sediment within the waterlines.
|
|
|
