The Reno Solid Brass Multi Color LED Rain And Waterfall Shower Head|Installation Details Reno Solid Brass Multi Color LED Rain And Waterfall Shower Head In Gold Color your daily shower with this beautiful and luxury color changing LED shower head. The LED light is powered by water flow, and will be activated once the water is turned on.The Reno two ways wall mount shower head is constructed using solid brass and comes in gold finish. It features rainfall as well as waterfall to which LED adds, especially with its changing colors. The 14.17* 19.68 inches shower head is free of any shower arm or slide bar, but it is certainly installed with such elements that ensure you a comfy bath while complementing your home décor. If you already have gold tone in your bath fixtures, it makes perfect sense to invest in gold rain shower head. This LED shower head can be installed in minutes, by simply unscrewing the old shower head and screwing in the new shower head. Just turn on the fun in your shower by simply turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature.It comes with an installation guide. Reno Solid Brass Multi Color LED Rain And Waterfall Shower Head In Gold Features Material: Brass Feature: LED Model Number: BS9811 Type: Square Style: Contemporary Surface Treatment: Gold Surface Finish:Brass Rainfall led: Blue,Green, Red Showerhead function: rain and waterfall Need electricity : Yes Color: Gold Size: 14.17*19.68 inches(360*500mm) Installation: Wall mount Rainfall led light: By water power BathSelect® Manufacturer Warranty Information

Keep the surface clean, regular cleaning.

Using water clean it, using a cotton cloth to wipe dry.

1. According to the dimensions and shape of the mounting bracket, determine the bracket location to be installed in the ceiling.

2. According to the 8 mounting holes on the mounting bracket, use Electric drill to make the mounting holes.

3. Using the two hexagonal nuts adjust the distance between the mounting bracket and the ceiling, and keep the mounting bracket on level.

Use explosion screw to fix mounting bracket on ceiling, pay attention to the explosion screw, it can adjust the height, and use level tool to adjust the mounting bracket to reach level.

4. Connecting Circuits

5. According to the chart shows: Raise the showerhead, Aim at the hole of the bolt, plug the bolt.

Use a phillips screwdriver screw out the upper cover 4 screws, open the plastic waterproof boxes.

Note: The same color line docking, brown line for line, blue line is zero line. Use a phillips screwdriver screw out the screws in plastic waterproof box wiring position, then put the fork terminal line connected, then fix it with a phillips screwdriver.

According to the circuit diagram as shown in step 5, then connect plastic waterproof case, please note that the same color of the wire when connecting circuit to docking.

6. Connecting water hoses and Tee joints and then connect the water hoses to the water inlet pipe connector.

7. Connecting 4 pcs water hose to 2 Tee joints and G1/2 joints in the middle and then put another side of the shower hoses through the showerhead side holes.

8. Installing the shower body by plugging the bolts. (As the above picture )