16 Inch Gold Tone Square Multi Color LED Rain Shower Head

This 16" square gold tone LED shower head will turn your shower into one that looks exceptional. If you already have gold tone in your bath fixtures, it makes perfect sense to invest in gold rain shower head. This 16" LED shower head can be installed in minutes, by simply unscrewing the old shower head and screwing in the new shower head. Just turn on the fun in your shower by simply turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built in dynamo that takes advantage of the water pressure to create the energy to light the bulbs

16 inch Gold Led Shower Head Features: Can be installed as Ceiling Mount. This high tech rain shower head powers the LED lights using a built in hidden dynamo The lights will automatically turn on when water pressure is turned on The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water and light The shower head will automatically change colors according to the temperature of the water so you always know how the water will feel on your skin just by looking at it Never be scalded again by entering a shower that is just too hot The threading is universal so it will fit any standard shower head by simply unscrewing the old one by hand and attaching the new one. A shower arm is not included, and can be purchased separately. The shower head can be used with either wall or ceiling mount arm Modern stylish design finished in gold made to match or stand out from your other bathroom fixtures High quality this modern shower head is made out of stainless steel so it's made to last! The LED lights will last the lifetime of the Gold shower head The flow rate is 2.5 GPM

Select the Shower head arm in Gold Finish

BathSelect® Manufacturer Warranty Information

Installation Instructions for Gold Tone Square Color Changing LED Rain Shower Head

1. Remove your existing shower head with a wrench.
2. Set the wrench in place and turn the nut to the left to loosen it.
3. Have a hand ready to catch the shower head when it falls so that the metal doesn’t crack your shower floor.
4. Clean the threads of the base of the shower head steel wool.
5. Be sure to remove any debris that had collected around the threads.
6. Wrap the threads with Teflon tape, This tape comes with almost all new shower faucets and heads and provides traction for the new hardware.
7. Place a rubber “O”-ring inside the new shower head and water connection, this prevents any leaks and improves water pressure.
8. Tighten the LED shower head.
9. Test the Temperature Controlled Shower Head to make sure there are no leaks and that everything is working properly.
10. Now you have a huge improvement in your bathroom for a minimal amount of cost and effort.