Fontana Gold Finish Square Multi-Color LED Rain Shower Set
This square gold finish shower set will turn your shower into one that looks exceptional. If you already have a gold finish in your bath fixtures, it makes perfect sense to invest in the gold finish shower head. The LED shower head can be installed as a ceiling mount. Just turn on the fun in your shower by simply turning on the water, the LED lights will automatically light up and set the mood. The shower head will automatically change colors according to the temperature of the water so you always know how the water will feel on your skin just by looking at it. All this with no batteries, everything is self-powered by a built-in dynamo that takes advantage of the water pressure to create the energy to light the bulbs. Enhance your modern bathroom with the Fontana Gold Finish Square Multi-Color LED Rain Thermostatic Shower Set, which comes complete with the Square ceiling mount shower head with sizes you can choose from 20" by 20", 24" by 24", 20" by 40", 31" by 31", 40" by 40", six square body jets, hand shower and the thermostatic triple shower valve. Easy installation, comes with all standard accessories. It is designed to be lightweight, durable and corrosion-resistant and has an automatic anti-scald device.
Fontana Gold Finish Square Multi-Color LED Rain Shower Set Features:
- Brand Name: BathSelect
- Model Number: BST0079-1GOLD
- Type: LED Shower Set
- Never be scalded again by entering a shower that is just too hot
- Shower Head comes with our adjustable arms that extends from 12"- 17"(cm 29~43)
- The Fontana shower head has a water flow rate of 2.1 GPM (8 L/min)
- Showerhead sizes: 20" by 20", 24" by 24", 20" by 40", 31" by 31", 40" by 40"See options
- Material: Stainless Steel
- Finish: Gold
- Body Spray: Set of 6 body spray
- Controller: Thermostatic controllers
- Showerhead Style: Contemporary Rain Shower
- Mount Method: Ceiling Mount
- Connection: 1/2" US standard
|
|
 
Installation Instructions for Fontana Gold Finish Square Multi-Color LED Rain Shower Set
- Before you begin, please read the installation instructions below. Observe all local building and safety codes.
- Unpack and inspect the product for any shipping damages. If you find damages, do not install.
- Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
|
shower
|
|
Ceiling Shower Head Installation Instructions
Step 2:
Hole size on ceiling
1. Drawing the line on the ceiling according to above specification
Decorative Cover
Pipe 1
2. Connect pipe 1 with decorative cover
Step 3:
3. Drill the holes on the ceiling according to the bove hole specification and install 4 pipes.
4. According to the right drawing, install four-pipe 2 into pipe 1. Put the screw bolts through the hole on the side to lock pipe 2 with pipe 1.
Step 4:
5. As the right drawing is shown, install four-pipe 2 on the head shower.
6. After fixing the showerhead on the ceiling, connect the shower hose with 2 water inlet on the showerhead back cover. The other end connects with the water outlet pipe in the wall.
Hand-Held Shower Instructions
|
Step 1:
|
|
Step 2:
|
|
Step 3 & 4:
|
|
Hand
Held
Shower
|
|
Hand
Held
Shower
|
|
|
Handheld Shower
|
|
Handheld Shower
|
|
Handheld Shower
|
|
Step 5:
|
|
Step 6 & 7:
|
|
Step 8:
|
|
|
|
|
|
2. HOLE LOCATIONS FOR WALL MOUNT
Remove Front Cover (A) from Wall Mount (B). Use Wall Mount Screw Holes (C) to place the desired location. Using a punch or awl, tap the screw hole locations.
Holes must be vertically aligned.
3. ANCHOR INSTALLATION
Drill two 1/4 dia. Holes (A). If installing into a studs drill two 1/8 dia. holes and do not use Anchors (B). Insert Anchors (B) into Holes (A) and tap flush with the wall.
4. WALL MOUNT INSTALLATION
Place Wall Mount (A) into wall and inset Mounting Screws (B) through Wall Mount Holes (C) and tighten until Wall Mount (A) is flush with the wall.
Do Not Over Tighten! Insert Front Cover (D) into Wall Mount (A)
5. DROP ELBOW & HOSE INSTALLATION
Apply PTFE plumbers tape on both ends of Pipe Nipple (A) (not included). Screw Pipe Nipple (A) into the elbow inside the wall.
The Pipe Nipple (A) is to project 1/4 3/4 from the finished wall. Screw Drop Elbow (B) onto Pipe Nipple (A) and tighten until Drop Elbow (B) is property positioned and flush to the finished wall.
Place Rubber Seal (C) inside Hex Hose Fitting (D). Connect Hex Hose Fitting (D) into Drop Elbow Outlet (E) by turning Hex Hose Fitting (D).
6. UNIT STARTUP
Turn on hot and cold water supplies, and check all connections for leaks.
7. FINAL FLUSHING
For final flushing, turn the valve on and allow water to run through the Hose (A) for several minutes.
Allow water to run for several minutes until all foreign matter clears the line.
8. SHOWER ARM INSTALLATION
Place Rubber Seal (A) inside Tapered Hose Fitting (B). Conned Hand Shower (C) to Hose (D) by turning Tapered Hose Fitting (B ) clockwise.
Warning: Make sure Hand Shower (C) is securely tightened to Hose (D).
Shower Mixer Installation Instructions
Step 1
|
mixer
|
Step 2
|
|
|
|
|
