Home > Installation Instructions for WALL MOUNT BRUSHED NICKEL WATERFALL TUB MIXER FAUCET WITH BRASS HANDHELD SHOWER

How to Install WALL MOUNT BRUSHED NICKEL WATERFALL TUB MIXER FAUCET WITH BRASS HANDHELD SHOWER | BS9366

	The BathSelect Deauville Brushed Gold Bathroom Rainfall Shower Combo Set with Tub Faucet a sleek look shower set, ensuring corrosion resistance and durable. The Showerhead has a rainfall function where you can experience the true feeling of rain. You can install the rain shower head and handheld Showerhead where you like just depend on the position of concealed water pipe. This shower set also comes with a tub faucet for the complete bathing experience. Made from high-quality brass, Brushed Gold finish to create a bright, highly reflective, beautiful metallic look. Effortlessly provides superior water pressure even in low pressure. This is one of the simplest products we offer, yet indispensable when it comes to installing a brand new shower. It comes complete with accessories and installation instructions.



Features:		Visit Product Page
Function: BATH TUB FAUCETS Feature: Waterfall, Wall Mount Style: Contemporary Finish: BRUSHED NICKEL Installation Holes: Five Holes Number of Handles: Three Handles Valve Type: Ceramic Valve Faucet Body Material: Brass Faucet Spout Material: Brass Faucet Handle Material: Brass Hand shower head: Brass Hand shower installation: Wall mount Faucet installation: Wall Mount Flow Rate: 1.3 GPM	shower

Important Note:

Before you begin, please read the installation instructions below. Observe all local building and safety codes.

Unpack and inspect the products for any shipping damages. If you find damages, do not install.

Please note all products must be installed by a professional and certified plumber otherwise warranty may be voided.

Tub mixer with handheld shower Installation Instructions

Step 1: Step 2: (connection)

Hand
Held
Shower
Hand
Held
Shower
Handheld Shower
Step 3: Size:

Handheld Shower

Step 1-Connections And Water Supply Hiring a plumber to handle the connections and water supply is very important especially if you’re replacing a conventional sink mounted faucet. The internal water supply lines have to be relocated in such cases.

Step 2-Determine the Faucet Height

Once the plumbing is complete, you need to decide at what height you want to install the faucet. When the right height is decided, be sure to mark it with a pencil.

Always take proper measurements. There must always be a 1 inch gap between the bottom of the faucet and the top of the sink. If the gap between the top of the sink and bottom of the faucet is more than 1 inch, the water will splash out of the sink.

Step 3: Drill Holes In The Wall

Once you have marked the level, you need to drill holes in the wall for fastening the bolts. Before you start to drill, verify that there are no pipes or any other wires behind the location.

Step 4: Attaching The Spout

To attach the spout to the wall plate, you need to position the washers and other hardware as instructed by the manufacturer. Once you attach the spout to the wall plate and position the washers, you need to tighten the bolts using an Allen wrench.

Step 4: Fasten The Spout And Wall Plate To The Wall

Once you have attached the spout to the wall plate, you need to position them on the wall. Position it in the right place from the holes you drilled previously and fasten the bolts into the wall.

Step 5: Attach The Necessary Hardware

After positioning and fastening the spout and w