Home > Installation Instruction Wall Mount Brushed Nickel Bathtub Faucet

The Wall Mount Brushed Nickel Bathtub Faucet Installation

Wall Mount Brushed Nickel Bathtub Faucet Mixer With Hand Shower

Our non-conventional brass body bathroom sink faucet is a unique element in modern style bathrooms. This is a classic feature and the special design handles are truly eye-catching. Contemporary bathroom waterfall bathtub faucet five holes triple handle mixer tap with hand held shower.The faucet body, spout and handle are made of solid brass and the valve core material is ceramic, a combination that guarantees a long lasting lifetime. Ideal for your bathroom. Ceramic core & brass valve materials provide durability with a sleek polished chrome finish. Independent hot and cold nozzles included. This has an elegant design and elevates the appeal of your decor made from the highest quality and for great tastes. When it comes to new upgrades, we are offering shape, finish and styles you're looking for.

Bathtub Faucet Mixer With Hand Shower Product description:

Function: BathTub Faucet
Feature: Waterfall, Wall Mount, Hand Shower
Style: Contemporary
Finish: Brushed Nickel
Installation Holes: Five Holes
Number of Handles: Triple Handle
Valve Type: Ceramic Valve
Faucet Body Material: Brass
Faucet Spout Material: Brass
Faucet Handle Material: Brass
Hand shower head: Brass
Spout Length: 8.9cm(3.5")
Spout Width: 19cm(7.4")
Flow Rate: 1.3 GPM

Products specifications:
Cold/Hot Water Control Type: Three Handles
Style: Contemporary
Exposed Bath & Shower Faucet Feature: Without Slide Bar
Surface Treatment: Brushed
Type: Fixed Support Type

BathSelect® Manufacturer Warranty Information

nstallation Instructions

Materials required for Installing a Wall-mount Bathroom Faucet:

A faucet
Faucet handles
Hot tap and Cold tap
Allen wrench
Drill machine
Pencil and ruler

Step 1-Connections And Water SupplyHiring a plumber to handle the connections and water supply is very important especially if you’re replacing a conventional sink mounted faucet. The internal water supply lines have to be relocated in such cases.

Step 2-Determine the Faucet Height

Once the plumbing is complete, you need to decide at what height you want to install the faucet. When the right height is decided, be sure to mark it with a pencil.

Always take proper measurements. There must always be a 1 inch gap between the bottom of the faucet and the top of the sink. If the gap between the top of the sink and bottom of the faucet is more than 1 inch, the water will splash out of the sink.

Step 3: Drill Holes In The Wall

Once you have marked the level, you need to drill holes in the wall for fastening the bolts. Before you start to drill, verify that there are no pipes or any other wires behind the location.

Step 4: Attaching The Spout

To attach the spout to the wall plate, you need to position the washers and other hardware as instructed by the manufacturer. Once you attach the spout to the wall plate and position the washers, you need to tighten the bolts using an Allen wrench.

Step 4: Fasten The Spout And Wall Plate To The Wall

Once you have attached the spout to the wall plate, you need to position them on the wall. Position it in the right place from the holes you drilled previously and fasten the bolts into the wall.

Step 5: Attach The Necessary Hardware

After positioning and fastening the spout and wall plate to the wall, you need to attach the faucet handles and hot and cold taps. Tighten the handles using your hand in a clockwise motion. Make sure they are secure before you begin to use them.