Home > Installation Instructions for Geneva Deck Mounted Smart Touch Sensor Faucet Dark Oil Rubbed Bronze Finish

Installation Instructions for Geneva Deck Mounted Smart Touch Sensor Faucet Dark Oil Rubbed Bronze Finish | BS10356


When it comes to new bathroom upgrades, BathSelect®is offering the shape, finishes and styles that you've looking for. Give your bathroom an elegant glance with the Geneva Deck Mounted Smart Touch Sensor Faucet Dark Oil Rubbed Bronze Finish. This is one of the most trendiest finishes across decor styles in the bathroom. The faucet has an elegant widespread flowing ideal for hand washing and other everyday tasks. This has an elegant design and elevates the appeal of your decor made from the highest quality and for great tastes. It comes super seal technology inside, capable of delivering superior performance with solid construction for long durability that will upgrade your bathroom with a modern and cool look for a long period of time.

Features: Visit Product Page

  • Brand Name: BathSelect
  • Model Number: BS10356
  • Style: Contemporary
  • Installation Type: Deck Mounted
  • Faucet Mount: Single Hole
  • Type: Ceramic Plate Spool
  • Surface Finish: Dark Oil Rubbed Bronze
  • Valve Core Material: Ceramic
  • Usage: Commercial/Residential
 sensor faucet Venice Antique Oil Rubbed Bronze Finish Brass Commercial Automatic Sensor Faucet

Important Note:
  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all products must be installed by a professional and certified plumber otherwise warranty may be voided.
    		•


    Sensor Faucet Installations Instructions


    Size:Hole Size:



    Parts:



    Step 1: Deck Mount InstallationStep 2: Control Box & Battery Connection

    		sensor



    Step 3:Step 4: (Correct way for Hose)



    1. Screw the hose into the corresponding screw-hole of the faucet body. Fix the o-ring into the bottom groove of the faucet body.
    2. Insert hose, threaded pipe and data cable through the drilled hole of the countertop. Put rubber washer and metal washer onto the threaded pipe, screwing in mounting nut. Adjust the faucet body correctly and tighten the mounting nut with screws.
    3. Install the control box to the faucet.
    4. Then connect the battery cable to the control box.
    5. Make Connections to water supplies. Turn on the water supply and flush water lines into a container for one minute.
    Important: This flushes away any debris that could cause damage to internal parts.
    6. Connect waterlines to angle stops. Turn on the angle stops and check for leaks (DO NOT TURN FAUCET ON).
    7. Turn the faucet on for 1 minute to flush any debris.


    Flexible Connecting Hose
    Care must be taken when connecting the flexible connection hose from the power supply box to the spout to ensure it does not bend sharply and kink or twist.
    See above for recommended ways to fit the flexible connecting hose.

    Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connection hose.



















    Functions:
    1. Water saving: water flows out when hands get close and when your hand moves away, water stops immediately.
    2. Hygienic: one open and close to hands-free from any contact, which can efficiently prevent mutual infection of bacteria
    3. Intelligent: with your computer to control its action, the faucet can auto-adjust its best detection zone as per color and the shape of the sink
    4. Low power consumption: for DC agitators, 4AA alkaline batteries can be used for 2 years.
    5. convenient to maintain: there is an internal filter to prevent the entry of the solenoid valve of miscellaneous and the filter is easy to clean.
    BathSelect Installation Instructions