HACKER SAFE certified sites prevent over 99.9% of hacker crime.

 







 

(24 Hours a day / 7 Days a week)
Serving the Bath Industry since 1991

 

(Your shopping cart is empty)
You are here: Home > Shower Panels > Shower Panel Simple Installation

The Juno and Fontana Showers®  Panel System comes complete, ready to install in just few simple steps!

Product is designed for both bathroom upgrade (without the need to
destroy your wall) or for new construction.

 

                          


Shower panel gives you a better shower experience than just using a conventional shower head. You will be able to rinse faster than ever before, while receiving the benefits of a massage and acupressure - Oriental technique applying pressure to specific "pressure points" on the body to improve the flow of energy.

 

 

 General diagram and illustrations (not meant for a specific model)

Every model has its complete; easy simple installation instructions that comes with it.

         

 

1.Hand Shower.

2. Shower Head.

3. Panel frame.

4. Shelf.

5. Adjustable Jets.

6 & 7. Diverter, Mixer and Thermostatic antiscalding device (most models).

8. Hanheld shower hose.

9. Connection base to handheld shower hose.

10. Tub spout.

11. Shower head hose.

12. Mounting bar.

13. Built in mixer flow diverter and thermostatic antiscaldind device.

14 & 17. Hoses connected to the different functions.

15. Standard US 1/2 " plumbing  Hot water hose (red).

16. Standard US 1/2 " plumbing  cold water hose (blue).

 

Simple Installation Instructions:

The Installation of Shower Panels are simple and easy;


Remove currently installed fixtures from shower system (hot and cold water knob(s)).


Install two installation brackets onto the wall
(Panel installs at desired height / all hardware is included).


Connect the hot (Red) and cold (Blue) water hook-ups  
(All plumbing is standard US 1/2").


Hang the shower system on the previously installed brackets



Test shower system to ensure the product is working properly


Caulk around the edges of the unit
(This is only required on some models)


Enjoy the relaxing experience the Shower Panel has to offer!

Total Estimated Installation Time
30 Minutes to 1 Hour 


More Technical details:


1.2 GPM Delivered per body spray under 45 PSI .

Efficient massage and low water consumption. 

Standard Half Inch Plumbing

Factory Pre-plumbed

Requires only 40psi to run.

The minimum pressure required is 29 psi and maximum pressure required 72.7.

 The minimum flow rate for both cold and hot water is 3.70 gpm.

Nothing to recess (avoids most risk of water damage).

Fast and convenient access for easy maintenance. 

With the ever growing support of North American Plumbing Codes requiring temperature protection in the shower, most our shower panels (except very few models) come with built-in thermostatic mixer which provides stable mixed water temperature, that help as an anti-scalding device in the showers.

Please note: If you have enough water pressure to adequately operate a handheld shower, you will not experience water issues with any of our shower panels. If you're absolutely sure you have low pressure in your house, you may have problems any shower panel will not solve.

 About Us
 Become an Affiliate
 Privacy Policy
 Send Us Feedback