Dimensions: 62"x32"x83" (Length × Width × Height)

Features

• Upper, middle and lower water jets.
• Jet cycle function
• Setting that rotates jets between upper, middle and lower at 6 second intervals.
• Thermostatic Mixer
• Maintains constant water temperature.
• Adjustable body massage water jets
• Overhead Shower
•  In roof panel.
• Hand Shower With holder
• Jet Massage
• Handheld showerhead with mounting rail 
• Temperature Regulation  
• Ozone Cleaning System

• • Telephone Speaker automatically switches to ring tone for incoming calls when in use. Volume adjustment.
  • Radio and speaker
  • FM radio with volume control.
  • Light
  • Overhead light with on/ off switch.
  • Extractor fan
  • With on/ off switch.
  • Foot Massage attaches to the inside wall of enclosure when not in use. Water jets and foot roller bars.
  • Whirlpool massage tub
  • Fog free mirror
  • Decorative mood lights
  • FM Radio tuner with audio input (CD player, etc)
  • Hands-free TELEPHONE
  • Shelves, soap dish
  • 5mm safety glass
  • Ventilation Fan

• Function
  
  
• Thermostatic Mixer
• Maintains constant water temperature.
  
  
• Overhead Shower In roof panel.
  
  
• Hand Shower With holder
  
  
• Jet Massage Upper, middle and lower water jets.
  
  
• Jet cycle function Setting that rotates jets between upper, middle and lower at 6 second intervals.
  
  
• Water jet nozzles
  
  
• Ozone Cleaning System
• After steam room use the steam generator is automatically drained and the ozone function is activated for 5 – 10 minutes to clean the system.
  
  
• Telephone
• Speaker automatically switches to ring tone for incoming calls when in use. Volume adjustment.
  
  
• Radio and speaker
• FM radio with volume control.
  
  
• Light
• Overhead light with on/ off switch.
  
  
• Extractor fan With on/ off switch.
  
  
• Foot Massage
• Attaches to the inside wall of enclosure when not in use. Water jets and foot roller bars.
  
  
• Massage Jets
• The water is turned on using the shower mixer valve and the shower jets are then activated using the change over valve. The upper, middle or lower jets can be activated using the corresponding button on the control panel. A jet cycle function can be activated on the control panel that cycles between upper middle and lower jets at 6-second intervals.
  
  
• Lamp
• An on/ off button on the control panel turns the light on and off.
  
  
• Fan
• An on/ off switch activates the fan at the top of the body panel and expels air. The fan vents into the room.
  
  
• Telephone
• An external telephone line can be connected and is activated when the on button is used on the control panel. For incoming calls the speaker is automatically switched on and by pressing the telephone key the call is activated.
  
  
• Ozone
• When the off key is pressed after 60 seconds the steam system drains and the ozone disinfecting system is automatically activated. Leave the doors closed and the steam room empty for 5–10 minutes. This function will automatically shut off.
  
  
• Physical Installation
• The steam room is fully assembled and tested in the factory before being disassembled and packed in three created boxes. To re assemble the steam room the following procedure is used:
  
  
• Level the tray using the foot bolts
  
  
• Assemble the body and frame on to the tray
  
  
• Install the fixed glass panels
  
  
• Install the top cover
  
  
• Fit the sliding doors
  
  
• Tighten the screws
  
  
• Apply sealant evenly
  
  
• Connect hot and cold inlets (flexible hosing)
  
  
  
• Shower Valve
• The thermostatic shower valve allows temperature to be increased or decreased. The change over valve switches the water between water jets, overhead shower, hand shower and foot massage
  
  
• Foot massage
• The foot massage contains water jets and massage rollers.